N4000-13EP PCB is a high-performance material launched by nelco. It is mainly used in aviation and communication fields, with TG value of 220 degrees, and is sold worldwide
Many properties of megtron4 PCB developed by Panasonic include high frequency performance, eye diagram test, through hole reliability, CAF resistance, IVH filling performance, lead-free compatibility, drilling performance and slag removal performance
Megtron7 PCB--Panasonic automotive and Industrial Systems Corporation announced on May 28, 2014 that it has developed a low loss multilayer substrate material "Megtron 7" for high-end servers, routers and supercomputers with large capacity and high-speed transmission. The relative permittivity of the product is 3.3 (at 1GHz) and the dielectric loss tangent is 0.001 (at 1GHz). Compared with the original product "Megtron 6", the transmission loss is reduced by 20%.
12OZ Heavy copper PCB is a layer of copper foil bonded on the glass epoxy substrate of printed circuit board. When the copper thickness is ≥ 2oz, it is defined as Heavy copper PCB. Performance of Heavy copper PCB: 12OZ Heavy copper PCB has the best elongation performance, which is not limited by processing temperature. Oxygen blowing can be used at high melting point, and brittle at low temperature. It is also fireproof and belongs to non combustible material. Even in highly corrosive atmospheric environment, copper board will form a strong, non-toxic passivation protection layer.
Large size sensor PCB--The sensor is a device to detect Du, which can sense the measured information, and can transform it into electrical signal or other required information output according to certain rules, so as to meet the requirements of information transmission, processing, storage, display, recording and control. It needs PCB, Large size sensor PCB to meet these requirements
MEGTRON6 PCB is advanced material designed for high-speed network equipment, mainframes, IC testers and high frequency measuring instruments. The main attributes of MEGTRON6 PCB are: low dielectric constant and dielectric dissipation factors, low transmission loss and high heat resistance; Td = 410°C (770°F). MEGTRON6 PCB meets IPC specification 4101 /102 /91.
