Quality

Quality System

To enhance quality control comprehensively, we must realize our quality policy and goal. Quality System are established according to ISO9001:2008 with regular internal audit to guarantee quality system is effectively operated. All staffs in HONTEC are participated into quality system, by keeping training and learning. Customer satisfication is our mission.

1)   Customer-orientedTo satisfy customer's increasing requirement is our purpose of quality system. Every people in HONTEC are do every effort to meet and exceed customer's expection.

2)  Quality policyOur policy for quality management are high quality, fast delivery, customers satisfaction and technology innovation.



Inspection

Item

Process

Equipment

Model

Manafacturer

1

Quality control

AOI Testor

Discovery8000<

Israel

2

Quality control

AOI Overhaul Stand

VeriSmart

Israel

3

Quality control

Special Testing Machine

HV300

China

4

Quality control

Flying probe E-testor

FX4000

China

5

Quality control

Impedance Testor

Tektronix DSA8200

USA

6

Quality control

Micro-section Analysis System

/

China

7

Quality control

Standing Voltage Reflector

TOS7030

Taiwan

8

Quality control

Racking Strength Reflector

BL12B

Japan

9

Quality control

Non-lead and Tin Stove

1200

China

10

Quality control

Lead and Tin Stove

1200

China

11

Quality control

Handhold Thickness Gauge

CM1500

USA



Raw Material

Raw Material

Specification

FR4

Rogers, Arlon, Taconic, TP-2, F4B, Megtron, Nelco, Isola, TUC,  EMC, VenTec, Shengyi, ITEQ, Kapton

Copper foil

Mitsui Kinzoku

Taiwan Changchun

Shangdong Jinbao

Prepreg

Rogers,Taconic, Megtron, Nelco, Isola, TUC,  EMC, VenTec, Shengyi, ITEQ

Soldermask

TaiYo

GuangXin

Bst Checmical

Greencure (Huizhou)

Chemical

MaxDermid Chemical

Rohm and Haas

Copper ball

Chengan Copper Industry

Tin bar

Sheng Nan Technology



Processing Control

1)   First article is implemented, along with self-inspection and spot check in each processing to inspect quality.

2)  To supervise our manufacturing process and working process through regular spot checking.

3)  Tools are stardardized with indicated placesa in lines properly.

4)  Regular maintainance and calibriation are applied for accuracy and validity of instruments and equipments.

5)  Training is a way to keep improving workers' skills.

6)  To provent any potential problem and make improvement actions during our quality control.



Outgoing inspection

Item

Standards

Board Characteristic

Appearance

IPC-A-600H or Customer Specification

Tolerance of hole size

IPC-A-600H or Customer Specification

Thickness

IPC-A-600H or Customer Specification

Track Width / Spacing

IPC-A-600H or Customer Specification

Soldermask / Silkscreen

IPC-A-600H or Customer Specification

Outline Tolerance

IPC-A-600H or Customer Specification

Surface

IPC-A-600H or Customer Specification

Inspection

Coating measure

IPC-A-600H or Customer Specification

PTH Wall Plating

IPC-A-600H or Customer Specification

Solderability

IPC-A-600H or Customer Specification

Thermal Shock

IPC-A-600H or Customer Specification

Solvent Test

IPC-A-600H or Customer Specification

Ionic Cleanliness

IPC-A-600H or Customer Specification

Isolation Resistance

IPC-A-600H or Customer Specification

Impedance

IPC-A-600H or Customer Specification



Complaint Service

Any feedback from customers is treated as our chance to contiously improve ourself:

1)  We will respect each Complaint from customers, and then we will study it to improve ourself.

2)  Effective actions will be adopted to solve any problem feedbacked from customers.

3) Upon verification of improvement actions, we will standardize them into ISO9001 quality system for future operation.



RoHS Control

1)  All staffs are in being trained to well known of RoHS instruction and requirement and follow RoHS control in full processing.


2)  Incoming raw materials must confirm to the RoHS requirements with related inspection report if applied.


3)  Raw material must be classified as RoHS or non-RoHS, and stored in different area separately.

4)  Regular inspection must be adopted every week to ensure finished products are completely meet RoHS requirement.






X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept