The characteristics of the combination of hard and soft boards determine that its application areas cover all the application areas of FPC on PCBs, such as: mobile phones, key boards and side buttons, computers and LCD screens, motherboards and display screens, CD Walkman, magnetic Disc player, NOTEBOOK. The newest components are HDD, suspension circuit of hard disk drive (Su ensi.N cireuit) and xe package board. The following is about HD Camera Rigid-Flex PCB related, I hope to help you better understand HD Camera Rigid-Flex PCB.
Matte Black HDI PCB--Any hole with a diameter of less than 150um is called microvia in the industry, and the circuit made by this geometric technology of microvia can improve the benefits of assembly, space utilization, etc. At the same time, it also has the effect of miniaturization of electronic products. Its necessity. The following is about Matte Black HDI Circuit Board related, I hope to help you better understand Matte Black HDI Circuit Board.
10G SFP+ LR is a high performance, cost effective modules, which is supporting Multi Rate 2.4576Gbps to 10.3125Gbps, and transmission distance up to 10km on SM fiber. The transceiver consists of two sections: The transmitter section incorporates a laser driver and a 1310nm DFB laser.The following is about 5G Optical Module PCB related, I hope to help you better understand 5G Optical Module PCB.
EM-888 7MM Thick PCB--As user applications require more and more board layers, alignment between layers becomes very important. Alignment between layers requires tolerance convergence. As the board size changes, this convergence requirement is more demanding. All layout processes are generated in a controlled temperature and humidity environment. The following is about EM888 7MM Thick PCB related, I hope to help you better understand EM888 7MM Thick PCB.
The aperture ratio of PCB is also called the ratio of thickness to diameter, which refers to the thickness of the board / aperture. If the aperture ratio exceeds the standard, the factory will not be able to process it. The limit of the aperture ratio cannot be generalized. For example, via holes, laser blind holes, buried holes, solder mask plug holes, resin plug holes, etc. are different. The aperture ratio of the via hole is 12: 1, which is a good value. The industry limit is currently 30: 1. The following is about 8MM Thick PCB related, I hope to help you better understand 8MM Thick PCB.
Signal transmission occurs at the moment when the signal state changes, such as rise or fall time. The signal passes a fixed time from the driving end to the receiving end. If the transmission time is less than 1/2 of the rise or fall time, the reflected signal from the receiving end will reach the driving end before the signal changes state. Conversely, the reflected signal will reach the drive end after the signal changes state. If the reflected signal is strong, the superimposed waveform may change the logic state. The following is about 12 Layer Taconic High Frequency Board related, I hope to help you better understand 12-Layer Taconic High Frequency PCB.
